Automatic doors Randburg: supply, installation and repairs

Randburg is one of the closest commercial areas to our Laser Park workshop, and a large share of its buildings went up in the 1980s and 1990s. That shapes what automatic doors Randburg owners call us about. Fewer brand-new towers, more established shopping centres, office blocks, medical buildings and light industrial units whose entrances have done decades of work.

This page explains what we see on automatic doors Randburg buildings run, when an older entrance should be repaired, upgraded or replaced, and what to send us for a quotation. Places named here describe the area. They are not a client list.

Older entrances: repair, upgrade or replace

An automatic door that has run for fifteen or twenty years is not necessarily finished. The leaves, frame and glass often have years left in them. What wears out is the running gear and the electronics: rollers, belts, the controller and the sensors. In many Randburg buildings the sensible answer is to keep the doorway and modernise the drive.

• Repair when one part has failed and the rest is sound. Our technicians work on our own operators and on other manufacturers’ doors.
• Upgrade when spares for an old operator are hard to find. Fitting a new operator to the existing leaves is usually much cheaper than a new entrance. See service and modernisation.
• Replace when the frame, glass or header is the problem, or the building has changed how the entrance is used.

We tell you which of the three applies before we quote, and we put the reasoning in writing.

The buildings behind automatic doors Randburg relies on

Randburg mixes almost every kind of building we work on. Shopping centres such as Cresta and the Brightwater Commons precinct carry heavy weekend retail traffic. Office blocks along Republic Road, Bram Fischer Drive and around Ferndale house professional practices and regional offices. Strijdom Park and the surrounding light industrial areas have showrooms, trade counters and staff entrances.

Each of those wants something different from an entrance. Retail wants throughput and secure closing. Offices want access control and a tidy lobby. Showrooms want a wide, inviting opening. Clinics and pharmacies want hands-free, accessible doors. See pharmacy automatic doors and office park automatic doors.

Retrofits on existing doors

Many enquiries about automatic doors Randburg businesses send us are not about new entrances at all. They are about making an existing manual door automatic, usually because of accessibility, hygiene or staff carrying stock.

A swing door can often be automated by fitting the MCW-100 above it, keeping the leaf, frame and hinges. The operator is 475 × 81 × 98 mm and drives doors up to 150 kg and 1,200 mm wide. A sliding door can be automated where the track and header are sound. Our guide on whether an existing door can be automated covers the checks.

Dust, storms and older tracks

Randburg sits on the Highveld like the rest of the city: dry, dusty winters and violent summer afternoon storms. Older entrances suffer more from both. Worn floor guides let dust build up in the track, and older seals let wind-driven rain onto the threshold.

The symptom is usually not a breakdown. It is a door that opens a fraction late, hesitates before closing or starts to grind. Those are adjustments and cleaning if they are caught early, and repairs if they are left. Our automatic door track guide explains what wears first.

Showrooms and trade counters

Strijdom Park and the light industrial areas around Randburg have many showrooms and trade counters, where customers arrive with their hands full and staff carry stock in and out all day.

Those entrances want a wide, inviting opening, a hold-open long enough for someone carrying a box, and a door that is easy to lock at closing time. On a swing door, push-and-go on the MCW-100 lets a light push on the leaf start the powered opening.

Choosing the right entrance in Randburg

Randburg choices are mostly about what is already there. Where a shopping centre or office block has a sound sliding door with a failing old operator, the usual answer is a new operator on the existing leaves. Where a professional practice or clinic has a manual swing door, the MCW-100 fitted above it is usually quickest and least disruptive.

New sliding entrances make sense when a building is being refurbished anyway, or when the old leaves, frame or header are the actual problem. We tell you which applies after looking at the door, and why.

Common faults on automatic doors Randburg

On Randburg entrances the faults are mostly age. Rollers worn flat, belts that have stretched, floor guides that have dropped, and sensors that have drifted or clouded. The door still runs, but it hesitates, grinds or reopens for no reason.

The second common fault is spares. An old controller fails and the part is no longer made. In that case we fit a new operator rather than search for a second-hand board, and the leaves and frame stay. See our automatic door track and automatic door not closing guides.

Working on site in Randburg

Most Randburg jobs happen in occupied, trading buildings. A shopping centre entrance is usually replaced or modernised before trading starts or after it ends, and an office or clinic door is done in a single visit where possible, so the practice is not left with a dead entrance.

For an operator upgrade on existing leaves we survey the header, track and leaves first, bring the operator pre-configured from Laser Park and keep the downtime to the hours we agreed. If the survey shows the leaves or frame need replacing too, you hear that before the job is booked, not on the day.

Servicing automatic doors Randburg

Older doors benefit most from regular servicing, because the wear is already advanced and small adjustments keep it from becoming a breakdown. Six months is our standard interval. For a building with several older entrances we often suggest a first visit to bring them all back into adjustment, then the regular cycle after that.

Every visit ends with a written record, and several doors or buildings can sit under one service level agreement. Safety settings are re-checked on every visit; see automatic door safety requirements and the South African Bureau of Standards.

Automatic doors Randburg: frequently asked

Other areas near Randburg

Automatic doors Johannesburg · Automatic doors Sandton · Automatic doors Roodepoort · Automatic doors Midrand · Automatic doors Fourways · Automatic doors Rosebank · Automatic doors Kempton Park · Automatic doors Centurion · Automatic doors Pretoria · All service areas

In short

Automatic doors Randburg at a glance

• Automatic doors Randburg are often upgraded with a new operator on the existing leaves rather than replaced.
• Automatic doors Randburg are repaired on any brand, including operators whose spares are no longer made.
• Automatic doors Randburg suit swing operators on existing clinic and office doors.
• Automatic doors Randburg need running gear and sensors checked more closely because of their age.
• Automatic doors Randburg in shopping centres are worked on before or after trading.
• Automatic doors Randburg are a short trip from our Laser Park workshop.
• Automatic doors Randburg are supplied, installed and serviced by our own technicians, with 24 months on the operator.