skip to Main Content

Gauteng · Horizon View, Horison and western Roodepoort

Automatic doors Horizon View: supply, installation and repairs

Automatic sliding and swing entrances for Horizon View, Horison and western Roodepoort: neighbourhood shops, clinics and pharmacies, schools, small offices and complex receptions.

Horizon View is a mainly residential Roodepoort suburb on the West Rand ridges, with neighbourhood shops, clinics and pharmacies, schools, small offices and complex receptions serving the surrounding homes. Many of these buildings date from the 1970s and 1980s and still have manual doors, and our Laser Park base is a short drive away.

This page explains what drives the specification for automatic doors Horizon View needs, how we support it from Laser Park, and what to send us for a quotation. Places named here describe the area. They are not a client list.

Neighbourhood shops

Local shops see steady trade with month-end peaks.

Bi-parting sliding doors, secure after hours. See automatic doors for shops.

What wears automatic doors Horizon View entrances: close to base, older buildings, ridge wind, power cuts
What wears an entrance in Horizon View, and what we specify against it.

Automatic doors Horizon View: what we supply, install and repair

People search for this work in different words: automatic doors Horizon View, automatic sliding doors Horizon View, automatic glass doors, automatic door installers, automatic door repairs Horizon View or door automation. It is the same team and the same operators either way, with 24 months on the operator.

We supply and install sliding, telescopic, swing, revolving and hermetic doors, carry out repairs on any brand and service entrances on a planned cycle. Pedestrian entrances only: no garage doors, gates, roller shutters, door closers or private homes.

Clinics and pharmacies

Clinics and pharmacies see patients all day.

Hands-free sliding or low-energy swing doors. See pharmacy automatic doors and automatic doors for disabled access.

Buildings that use automatic doors Horizon View: retail and shopping centres, medical practices and pharmacies, schools and colleges
The building stock that sets the specification for automatic doors Horizon View.

Schools

Schools need controlled receptions and safe exits.

Push-button swing doors and sliding doors at reception. See automatic doors for schools.

Small offices

Small offices need controlled receptions.

Sliding doors with access control. See office park automatic doors and automatic door access control.

Complex receptions

Complex clubhouses and receptions need doors that suit residents of all ages.

Low-energy swing doors on push buttons. See automatic door push button.

Older entrances

Older buildings often have manual doors that can be automated.

A new operator on the existing door where the frame allows. See automate an existing door and automatic door modernisation.

The systems we install in Horizon View

Most automatic doors Horizon View buildings need come down to two operators, both imported and assembled at Laser Park and tested to one million operating cycles: the MC-125 sliding door operator, supplied from R27 590 excluding VAT, and the MCW-100 swing door operator, supplied from R15 900 excluding VAT, as published on our sister company Coetz.

The finished price depends on the leaves, glass, header, sensors, locking and access control, all quoted per site. See our automatic door prices guide and sliding vs swing door guide.

Every entrance also gets a defined power-failure behaviour, agreed with the building and its fire strategy; see automatic doors and load shedding.

Choosing the right entrance in Horizon View

Shops get bi-parting sliding doors. Clinics get hands-free doors. Schools get controlled receptions. Older buildings often get an operator on the existing door.

Accessible entrances in Horizon View

An automatic door is the simplest way to make an entrance usable for a wheelchair user, a parent with a pram or someone carrying stock. Opening width, opening speed, hold-open time and the sensor field are set on site for the people who actually use the door, and push buttons can be added where a door should only open on request. See automatic doors for disabled access.

Common faults on automatic doors Horizon View

Wear on older frames and dust blown in off the ridges. See automate an existing door.

Most faults are cleared on the first visit because our technicians carry common spares. Where a door is beyond economic repair, we quote a new operator on the existing leaves first, before a full replacement. See automatic door lifespan.

Working on site in Horizon View

Shops and clinics keep one entrance open while we work. Every job starts with a safe-work method, and the doorway is barricaded while it is open.

Servicing automatic doors Horizon View

Shop and clinic entrances are serviced against cycles; offices on our six-month standard.

Every visit ends with a written record, and several doors or buildings can sit under one service level agreement. Safety settings are re-checked on every visit; see automatic door safety requirements and the South African Bureau of Standards.

How we support automatic doors Horizon View

Horizon View is in Gauteng, within reach of our Laser Park base in Roodepoort. Same-day attendance in Gauteng is normally possible because both the workshop and the spares are in Laser Park. Response for each site is agreed up front against what a failure costs you.

  • Our own technicians install, commission and service the doors. We do not sub-contract the work.
  • Our technicians are trained on our own operators and on other manufacturers’ operators. See automatic door technician.
  • Spares for the MC-125 and MCW-100 are held at Laser Park; see automatic door spare parts.
Automatic doors Horizon View coverage across Horizon View, Horison and western Roodepoort, attended from our Laser Park base, schematic map
Horizon View is attended from our Laser Park base in Roodepoort. Schematic, not to scale.

What to send us for an automatic doors Horizon View quote

A photograph and a few measurements settle most of the specification before anyone visits. Send us:

  • A photograph of the doorway taken from far enough back to show the wall on both sides.
  • A photograph of the header and ceiling above the door.
  • The clear opening width and height.
  • Who uses the door and how busy it gets at the worst time of day.
  • Whether the existing door and frame are in good condition.
What to send for an automatic doors Horizon View quotation
Five things that settle a quotation before the site visit.

A quotation for automatic doors Horizon View usually follows within two working days of a site visit or a complete set of photographs. Request a quote or call 010 412 0062, Monday to Thursday 08:00 to 16:30 and Friday 08:00 to 14:00.

Automatic doors Horizon View by building type

The buildings in Horizon View set the specification more than anything else. These are the starting points we use for each type, before every doorway is confirmed on site.

Retail entrances in Horizon View

Shop and centre entrances are judged on two things: they must never stop trading, and they must lock tight at closing. For automatic doors Horizon View retailers use, we fit bi-parting sliding doors with a wide clear opening for trolleys and prams, a night lock that throws automatically when the centre closes, and sensors set so that people walking past the shopfront do not keep opening the door and letting the air-conditioning out. Busy entrances get a service interval based on cycles, not months.

Office receptions in Horizon View

An office reception sees staff, visitors and couriers all day and needs to stay controlled. Automatic doors Horizon View offices use are normally sliding doors linked to the building’s card, tag or biometric readers, with a free-entry mode in office hours and controlled entry after hours. The door releases on the fire signal, and it can be set to stay locked during a panic event while still allowing escape from inside.

Schools, churches and halls in Horizon View

Schools, churches and halls move large numbers of people in a few minutes and then need the entrance controlled. Automatic doors Horizon View schools and halls use are usually swing doors with push buttons on halls and classrooms, so staff decide when a door opens, and sliding doors at reception linked to the visitor system.

How we deal with conditions in Horizon View

The four things that wear an entrance in Horizon View are shown in the first diagram. This is what we do about each of them on automatic doors Horizon View.

Condition in Horizon View What we do
Older buildings Many entrances in older buildings run on operators whose parts are no longer made. We can usually fit an MC-125 or MCW-100 to the existing leaves and frame, which costs much less than a new entrance.
Ridge wind Storms bring wind, driving rain and, inland, hail; coastal sites add salt. We set sensors to ignore blowing leaves, use laminated or toughened safety glass, add surge protection where lightning is common and consider a revolving door where wind drives through a lobby.
Power cuts Battery backup keeps a door working through load shedding, and every entrance gets a defined power-failure behaviour, open or closed, agreed with the building and its fire strategy.

Sliding, swing or revolving: choosing automatic doors Horizon View

Most entrances in Horizon View are one of three types. The right one depends on the opening, the traffic and the people who use the door.

Door type Best for Operator
Sliding (single or bi-parting) Busy main entrances, malls, hospitals, offices MC-125
Telescopic sliding Wide openings where the wall space is short MC-125 telescopic
Swing Corridors, toilets, existing doors, low traffic MCW-100
Revolving Tall or windy lobbies, energy saving Revolving system
Hermetic sliding Theatres, laboratories, clean rooms Hermetic system

Sliding doors move the most people and suit most automatic doors Horizon View main entrances. Swing doors suit narrow openings and existing doors. Revolving doors keep wind and heat loss out of a lobby but always need a swing door beside them for wheelchairs and goods. See automatic sliding doors, automatic swing doors and automatic revolving doors.

How an automatic doors Horizon View project runs

  1. Photographs and measurements. You send the opening, a photograph and how busy the door is; we confirm the door type.
  2. Site visit. A technician checks the header, the floor, the power supply and the access-control connection.
  3. Written quotation. The configuration, the price and the lead time are confirmed in writing before anything is ordered.
  4. Installation. Our own team installs the operator and leaves, usually in a day for a standard entrance, keeping one door working where possible.
  5. Commissioning. Speeds, hold-open times, sensors and locking are set for the users, and the safety sensors are tested.
  6. Handover and service plan. You get a record of the settings and a service interval based on how busy the door is.

Most automatic doors Horizon View installations in Gauteng are completed within two to three weeks of the order, depending on glass and leaves. Repairs and replacement operators are usually faster because the spares are in Laser Park.

Maintaining automatic doors Horizon View

An automatic door is a machine that opens and closes thousands of times a week. Regular servicing keeps it safe and avoids most breakdowns. On every service of automatic doors Horizon View we:

  • Clean and check the track, rollers and guides.
  • Check the belt, motor, gearbox and controller.
  • Test the activation and safety sensors, and re-aim them if needed.
  • Check the locking, the battery backup and the power-failure behaviour.
  • Record the cycle count and the settings, and report anything that needs attention.

See the automatic door maintenance checklist and automatic door servicing.

Safety settings on automatic doors Horizon View

Safety sensors stop or reverse a door before it touches anyone, and the opening and closing forces are limited. We set and test these on commissioning and on every visit, and we can add signage and markings so that people can see the glass. See automatic door signage.

Why choose MC Automations for automatic doors Horizon View

  • Our own operators. The MC-125 and MCW-100 are imported and assembled at our Laser Park base and tested to one million cycles.
  • Our own team. We install, commission, service and repair with our own technicians, never sub-contractors.
  • Any brand. We repair and service other manufacturers’ doors too, and can modernise an old entrance by fitting a new operator.
  • Close to Horizon View. Our workshop and spares are in Roodepoort, so Gauteng sites are attended quickly.
  • Clear pricing. Operators have published starting prices, and every site gets a written quotation.
  • Warranty. 24 months on the operator.

Areas we cover around Horizon View

From Laser Park we attend sites across Horizon View and the neighbouring areas of Horison, Roodekrans, Wilro Park, Florida Park and Roodepoort. The same technicians, operators and spares serve every one of them, so a site in Horison gets the same response and the same service record as one in the next suburb.

Access control and automatic doors Horizon View

Most commercial entrances in Horizon View are part of a security system. We connect the door to card, tag, biometric, keypad or intercom readers, to a timer for trading hours and to the alarm, so the door runs in free mode when the building is open and controlled mode when it is not. The door releases on the fire signal and can be set to lock during a panic event while still letting people out. See automatic door access control and automatic door security.

Power failures and fire release

Every automatic doors Horizon View entrance is commissioned with a defined behaviour for a power failure and for a fire alarm: open and stay open, close and lock, or keep running on battery backup. The choice is agreed with the building owner and its fire strategy and recorded at handover, then tested on every service. See automatic door power.

Upgrading an older entrance in Horizon View

Many entrances in Horizon View were built with manual aluminium or timber doors that still have years of life in the frame. Upgrading them is often the quickest route to automatic doors Horizon View buildings need: we check that the frame is square, that the header can carry an operator and that the glass is safety glass, then fit an MC-125 sliding operator or an MCW-100 swing operator to the existing leaves where they are sound.

Where the frame is tired or the glass is not laminated or toughened, we quote new leaves and keep the opening size, so the building work stays small. Either way the upgrade comes with sensors, a defined power-failure behaviour, 24 months on the operator and a written service record, and it usually takes a day on site. Send a photograph of the door and the header, and we will tell you which route suits your entrance in Horizon View before anyone visits.

Automatic doors Horizon View: frequently asked

Can you automate an existing door in Horizon View?

Often, yes. Where the frame and leaf are sound, we fit a new operator to the existing door.

Which areas do you cover around Horizon View?

Horizon View, Horison, Roodekrans, Wilro Park, Florida Park and central Roodepoort.

How fast can you attend a breakdown in Horizon View?

Same-day attendance in Gauteng is normally possible because our workshop and spares are in Laser Park. Response is agreed per site.

Do you automate garage doors or gates in Horizon View?

No. We do pedestrian entrances only. Garage doors, driveway gates and roller shutters are a separate trade.

How much do automatic doors Horizon View cost?

The MC-125 sliding door operator starts from R27 590 excluding VAT and the MCW-100 swing door operator from R15 900 excluding VAT. The finished price depends on the leaves, glass, sensors and access control, and is quoted per site.

What warranty do automatic doors Horizon View carry?

24 months on the operator, installed and serviced by our own team.

How often should automatic doors Horizon View be serviced?

Every six months for an average door, and more often for busy, dusty or hospital entrances, based on the cycle count.

Need automatic doors in Horizon View?

Send the opening, the traffic and a photograph, and we will confirm the configuration in writing before anything is ordered.

In short

Automatic doors Horizon View at a glance

  • Automatic doors Horizon View in shops are bi-parting sliding doors.
  • Automatic doors Horizon View in clinics are hands-free.
  • Automatic doors Horizon View often reuse the existing door.
  • Automatic doors Horizon View are a short drive from our Laser Park base.
  • Automatic doors Horizon View carry 24 months on the operator and are serviced by our own team.
Back To Top