skip to Main Content

Eastern Cape · Graaff-Reinet and the Camdeboo

Automatic doors Graaff-Reinet: supply, installation and repairs

Automatic sliding and swing entrances for Graaff-Reinet and the Camdeboo: hotels and guest houses, shops and supermarkets, the hospital and clinics, schools and municipal buildings.

Graaff-Reinet is a historic Karoo town in the Camdeboo, built on farming and tourism, with hotels and guest houses, shops and supermarkets, a hospital and clinics, schools and municipal offices. Heritage buildings, Karoo dust, hot summers and cold winters shape what automatic doors Graaff-Reinet buildings use.

This page explains what drives the specification for automatic doors Graaff-Reinet needs, how we support it from Laser Park, and what to send us for a quotation. Places named here describe the area. They are not a client list.

Hotels and guest houses

Hotels and guest houses host tourists and travellers, many in heritage buildings.

In Graaff-Reinet, MC Automations supplies, installs and services automatic doors for commercial buildings, from commercial automatic doors and automatic glass doors to the automatic door operators that drive them. See how an automatic sliding door mechanism works, or plan your automatic door installation with us.

Discreet sliding or swing operators that respect the building. See hotel automatic doors and frameless automatic sliding doors.

What wears automatic doors Graaff-Reinet entrances: dust, heat and cold, heritage fronts, power cuts
What wears an entrance in Graaff-Reinet, and what we specify against it.

Automatic doors Graaff-Reinet: what we supply, install and repair

People search for this work in different words: automatic doors Graaff-Reinet, automatic sliding doors Graaff-Reinet, automatic glass doors, automatic door installers, automatic door repairs Graaff-Reinet or door automation. It is the same team and the same operators either way, with 24 months on the operator.

We supply and install sliding, telescopic, swing, revolving and hermetic doors, carry out repairs on any brand and service entrances on a planned cycle. Pedestrian entrances only: no garage doors, gates, roller shutters, door closers or private homes.

Shops and supermarkets

Supermarkets and shops serve the town and the farms around it.

Bi-parting sliding doors, secure after hours. See shopping centre automatic doors.

Buildings that use automatic doors Graaff-Reinet: hotels and conference venues, retail and shopping centres, hospitals and clinics
The building stock that sets the specification for automatic doors Graaff-Reinet.

Hospital and clinics

The hospital and clinics need hands-free entrances with battery backup.

Hands-free sliding doors with battery backup. See hospital automatic doors.

Schools

Schools, including boarding schools, need controlled receptions.

Push-button swing doors and sliding doors at reception. See automatic doors for schools.

Municipal offices

Municipal offices serve queues.

Accessible sliding doors with access control. See automatic doors for disabled access.

Agri-business offices

Co-operatives and wool and mohair businesses have trade counters.

Wide sliding doors. See automatic doors for shops.

The systems we install in Graaff-Reinet

Most automatic doors Graaff-Reinet buildings need come down to two operators, both imported and assembled at Laser Park and tested to one million operating cycles: the MC-125 sliding door operator, supplied from R27 590 excluding VAT, and the MCW-100 swing door operator, supplied from R15 900 excluding VAT, as published on our sister company Coetz.

The finished price depends on the leaves, glass, header, sensors, locking and access control, all quoted per site. See our automatic door prices guide and sliding vs swing door guide.

Every entrance also gets a defined power-failure behaviour, agreed with the building and its fire strategy; see automatic doors and load shedding.

Choosing the right entrance in Graaff-Reinet

Hotels get discreet operators. Shops get bi-parting sliding doors. Healthcare gets hands-free doors. Municipal offices get accessible doors.

Accessible entrances in Graaff-Reinet

An automatic door is the simplest way to make an entrance usable for a wheelchair user, a parent with a pram or someone carrying stock. Opening width, opening speed, hold-open time and the sensor field are set on site for the people who actually use the door, and push buttons can be added where a door should only open on request. See automatic doors for disabled access.

Common faults on automatic doors Graaff-Reinet

Karoo dust, heat and cold-weather wear. See automatic door maintenance checklist.

Most faults are cleared on the first visit because our technicians carry common spares. Where a door is beyond economic repair, we quote a new operator on the existing leaves first, before a full replacement. See automatic door lifespan.

Working on site in Graaff-Reinet

Heritage buildings may need approval for changes to the front; we work within it. Every job starts with a safe-work method, and the doorway is barricaded while it is open.

Servicing automatic doors Graaff-Reinet

Shop and hospital entrances are serviced against cycles on planned visits.

Every visit ends with a written record, and several doors or buildings can sit under one service level agreement. Safety settings are re-checked on every visit; see automatic door safety requirements and the South African Bureau of Standards.

How we support automatic doors Graaff-Reinet

Graaff-Reinet is served from our Laser Park base in Johannesburg. Planned installation and servicing visits are batched across Eastern Cape to keep travel down, and breakdown attendance is agreed in writing for each site, against what a failure costs you. Common spares travel with the technician, so most faults are cleared on the first visit.

  • Our own technicians install, commission and service the doors. We do not sub-contract the work.
  • Our technicians are trained on our own operators and on other manufacturers’ operators. See automatic door technician.
  • Spares for the MC-125 and MCW-100 are held at Laser Park; see automatic door spare parts.
Automatic doors Graaff-Reinet coverage across Graaff-Reinet and the Camdeboo, served from Johannesburg on planned visits, schematic map
Graaff-Reinet is served from our Laser Park base in Johannesburg on planned visits. Schematic, not to scale.

What to send us for an automatic doors Graaff-Reinet quote

A photograph and a few measurements settle most of the specification before anyone visits. Send us:

  • A photograph of the doorway taken from far enough back to show the wall on both sides.
  • A photograph of the header and ceiling above the door.
  • The clear opening width and height.
  • Who uses the door and how busy it gets at the worst time of day.
  • Whether the building is a heritage front.
What to send for an automatic doors Graaff-Reinet quotation
Five things that settle a quotation before the site visit.

A quotation for automatic doors Graaff-Reinet usually follows within two working days of a site visit or a complete set of photographs. Request a quote or call 010 412 0062, Monday to Thursday 08:00 to 16:30 and Friday 08:00 to 14:00.

Automatic doors Graaff-Reinet by building type

The buildings in Graaff-Reinet set the specification more than anything else. These are the starting points we use for each type, before every doorway is confirmed on site.

Hotel and venue entrances in Graaff-Reinet

Hotels and conference venues want a quiet, warm lobby and an entrance that copes with guests carrying luggage and delegates arriving in groups. Automatic doors Graaff-Reinet hotels use are wide sliding doors with a night mode that admits guests by card, or a revolving door with a swing door beside it where wind and draughts are a problem. Opening speed is set for the busiest moments, such as a conference break.

Retail entrances in Graaff-Reinet

Shop and centre entrances are judged on two things: they must never stop trading, and they must lock tight at closing. For automatic doors Graaff-Reinet retailers use, we fit bi-parting sliding doors with a wide clear opening for trolleys and prams, a night lock that throws automatically when the centre closes, and sensors set so that people walking past the shopfront do not keep opening the door and letting the air-conditioning out. Busy entrances get a service interval based on cycles, not months.

Healthcare entrances in Graaff-Reinet

Healthcare buildings need hands-free entry for patients in wheelchairs, on crutches and on stretchers, and doors that never trap anyone. For automatic doors Graaff-Reinet clinics and hospitals use, we set slow closing speeds, long hold-open times and a wide sensor field, fit battery backup so the entrance keeps working through load shedding, and use hermetically sealed doors where theatres or isolation rooms need an air seal.

Schools, churches and halls in Graaff-Reinet

Schools, churches and halls move large numbers of people in a few minutes and then need the entrance controlled. Automatic doors Graaff-Reinet schools and halls use are usually swing doors with push buttons on halls and classrooms, so staff decide when a door opens, and sliding doors at reception linked to the visitor system.

Office receptions in Graaff-Reinet

An office reception sees staff, visitors and couriers all day and needs to stay controlled. Automatic doors Graaff-Reinet offices use are normally sliding doors linked to the building’s card, tag or biometric readers, with a free-entry mode in office hours and controlled entry after hours. The door releases on the fire signal, and it can be set to stay locked during a panic event while still allowing escape from inside.

How we deal with conditions in Graaff-Reinet

The four things that wear an entrance in Graaff-Reinet are shown in the first diagram. This is what we do about each of them on automatic doors Graaff-Reinet.

Condition in Graaff-Reinet What we do
Dust Dust wears tracks, rollers and sensors. We fit brushes and seals, clean the track and lens on every visit and shorten the service interval on dusty sites.
Heritage fronts Many entrances in older buildings run on operators whose parts are no longer made. We can usually fit an MC-125 or MCW-100 to the existing leaves and frame, which costs much less than a new entrance.
Power cuts Battery backup keeps a door working through load shedding, and every entrance gets a defined power-failure behaviour, open or closed, agreed with the building and its fire strategy.

Sliding, swing or revolving: choosing automatic doors Graaff-Reinet

Most entrances in Graaff-Reinet are one of three types. The right one depends on the opening, the traffic and the people who use the door.

Door type Best for Operator
Sliding (single or bi-parting) Busy main entrances, malls, hospitals, offices MC-125
Telescopic sliding Wide openings where the wall space is short MC-125 telescopic
Swing Corridors, toilets, existing doors, low traffic MCW-100
Revolving Tall or windy lobbies, energy saving Revolving system
Hermetic sliding Theatres, laboratories, clean rooms Hermetic system

Sliding doors move the most people and suit most automatic doors Graaff-Reinet main entrances. Swing doors suit narrow openings and existing doors. Revolving doors keep wind and heat loss out of a lobby but always need a swing door beside them for wheelchairs and goods. See automatic sliding doors, automatic swing doors and automatic revolving doors.

How an automatic doors Graaff-Reinet project runs

  1. Photographs and measurements. You send the opening, a photograph and how busy the door is; we confirm the door type.
  2. Site visit. A technician checks the header, the floor, the power supply and the access-control connection.
  3. Written quotation. The configuration, the price and the lead time are confirmed in writing before anything is ordered.
  4. Installation. Our own team installs the operator and leaves, usually in a day for a standard entrance, keeping one door working where possible.
  5. Commissioning. Speeds, hold-open times, sensors and locking are set for the users, and the safety sensors are tested.
  6. Handover and service plan. You get a record of the settings and a service interval based on how busy the door is.

Most automatic doors Graaff-Reinet installations in Gauteng are completed within two to three weeks of the order, depending on glass and leaves. Repairs and replacement operators are usually faster because the spares are in Laser Park.

Maintaining automatic doors Graaff-Reinet

An automatic door is a machine that opens and closes thousands of times a week. Regular servicing keeps it safe and avoids most breakdowns. On every service of automatic doors Graaff-Reinet we:

  • Clean and check the track, rollers and guides.
  • Check the belt, motor, gearbox and controller.
  • Test the activation and safety sensors, and re-aim them if needed.
  • Check the locking, the battery backup and the power-failure behaviour.
  • Record the cycle count and the settings, and report anything that needs attention.

See the automatic door maintenance checklist and automatic door servicing.

Safety settings on automatic doors Graaff-Reinet

Safety sensors stop or reverse a door before it touches anyone, and the opening and closing forces are limited. We set and test these on commissioning and on every visit, and we can add signage and markings so that people can see the glass. See automatic door signage.

Why choose MC Automations for automatic doors Graaff-Reinet

  • Our own operators. The MC-125 and MCW-100 are imported and assembled at our Laser Park base and tested to one million cycles.
  • Our own team. We install, commission, service and repair with our own technicians, never sub-contractors.
  • Any brand. We repair and service other manufacturers’ doors too, and can modernise an old entrance by fitting a new operator.
  • Planned visits to Graaff-Reinet. Sites outside Gauteng are served from Laser Park on planned visits, with breakdown attendance agreed in writing.
  • Clear pricing. Operators have published starting prices, and every site gets a written quotation.
  • Warranty. 24 months on the operator.

Areas we cover around Graaff-Reinet

We serve sites across Graaff-Reinet and the neighbouring areas of Umasizakhe, Kroonvale, Camdeboo park, Aberdeen and Nieu-Bethesda from our Laser Park base in Johannesburg. Planned visits are batched across the area to keep travel down, and breakdown attendance is agreed in writing for each site. The same operators, settings and service records apply in Graaff-Reinet as in Gauteng.

Access control and automatic doors Graaff-Reinet

Most commercial entrances in Graaff-Reinet are part of a security system. We connect the door to card, tag, biometric, keypad or intercom readers, to a timer for trading hours and to the alarm, so the door runs in free mode when the building is open and controlled mode when it is not. The door releases on the fire signal and can be set to lock during a panic event while still letting people out. See automatic door access control and automatic door security.

Power failures and fire release

Every automatic doors Graaff-Reinet entrance is commissioned with a defined behaviour for a power failure and for a fire alarm: open and stay open, close and lock, or keep running on battery backup. The choice is agreed with the building owner and its fire strategy and recorded at handover, then tested on every service. See automatic door power.

Automatic doors Graaff-Reinet: frequently asked

Can you fit automatic doors to heritage buildings in Graaff-Reinet?

Often, yes. Discreet sliding or swing operators can be fitted with little change to the front, subject to any approval the building needs.

Which areas do you cover around Graaff-Reinet?

Graaff-Reinet, Umasizakhe, Kroonvale, Aberdeen side and the Camdeboo.

How quickly can you attend a breakdown in Graaff-Reinet?

We serve Graaff-Reinet from our Laser Park base in Johannesburg on planned visits. Breakdown attendance is agreed in writing for each site, and common spares travel with the technician.

Do you automate garage doors or gates in Graaff-Reinet?

No. We do pedestrian entrances only. Garage doors, driveway gates and roller shutters are a separate trade.

How much do automatic doors Graaff-Reinet cost?

The MC-125 sliding door operator starts from R27 590 excluding VAT and the MCW-100 swing door operator from R15 900 excluding VAT. The finished price depends on the leaves, glass, sensors and access control, and is quoted per site.

What warranty do automatic doors Graaff-Reinet carry?

24 months on the operator, installed and serviced by our own team.

How often should automatic doors Graaff-Reinet be serviced?

Every six months for an average door, and more often for busy, dusty or hospital entrances, based on the cycle count.

Need automatic doors in Graaff-Reinet?

Send the opening, the traffic and a photograph, and we will confirm the configuration in writing before anything is ordered.

In short

Automatic doors Graaff-Reinet at a glance

  • Automatic doors Graaff-Reinet at hotels are discreet.
  • Automatic doors Graaff-Reinet in shops lock after hours.
  • Automatic doors Graaff-Reinet in healthcare are hands-free.
  • Automatic doors Graaff-Reinet are served on planned visits.
  • Automatic doors Graaff-Reinet carry 24 months on the operator and are serviced by our own team.
Back To Top