Gauteng · Chloorkop and Kempton Park north
Automatic doors Chloorkop: supply, installation and repairs
Automatic sliding and swing entrances for Chloorkop: chemical and manufacturing plants, laboratories, warehouses and distribution, offices and staff entrances.
Chloorkop is an industrial area in northern Kempton Park, near Tembisa and the R21, with chemical and manufacturing plants, laboratories, warehouses and distributors, offices and staff entrances. Fumes, dust, hygiene and safety rules, and shift changes shape what automatic doors Chloorkop buildings use, and our Laser Park base is close enough for quick attendance. Plant owners usually want every door on a pedestrian route to fail safe in a fire alarm, open on a power cut where an escape route needs it, and report its status to the security room, so we agree the behaviour of each door in writing before we fit it.
This page explains what drives the specification for automatic doors Chloorkop needs, how we support it from Laser Park, and what to send us for a quotation. Places named here describe the area. They are not a client list.
Chemical and manufacturing plants
Plant offices, change rooms and canteens see shift changes and fumes.
Robust sealed sliding doors on pedestrian routes. See automatic warehouse doors and automatic door track.
Automatic doors Chloorkop: what we supply, install and repair
People search for this work in different words: automatic doors Chloorkop, automatic sliding doors Chloorkop, automatic glass doors, automatic door installers, automatic door repairs Chloorkop or door automation. It is the same team and the same operators either way, with 24 months on the operator.
We supply and install sliding, telescopic, swing, revolving and hermetic doors, carry out repairs on any brand and service entrances on a planned cycle. Pedestrian entrances only: no garage doors, gates, roller shutters, door closers or private homes.
Laboratories
Quality labs need sealed, hands-free doors.
Hermetic or sealed sliding doors. See hermetic doors.
Warehouses and distributors
Receptions sit beside loading areas.
Sliding doors with access control. See automatic door access control.
Offices
Offices need controlled receptions.
Sliding doors with access control. See office park automatic doors.
Canteens
Canteens see staff in waves.
Wide sliding doors. See shopping centre automatic doors.
On-site clinics
On-site clinics need hands-free entrances.
Hands-free sliding doors. See hospital automatic doors.
The systems we install in Chloorkop
Most automatic doors Chloorkop buildings need come down to two operators, both imported and assembled at Laser Park and tested to one million operating cycles: the MC-125 sliding door operator, supplied from R27 590 excluding VAT, and the MCW-100 swing door operator, supplied from R15 900 excluding VAT, as published on our sister company Coetz.
The finished price depends on the leaves, glass, header, sensors, locking and access control, all quoted per site. See our automatic door prices guide and sliding vs swing door guide.
Every entrance also gets a defined power-failure behaviour, agreed with the building and its fire strategy; see automatic doors and load shedding.
Choosing the right entrance in Chloorkop
Plants get robust sealed doors. Labs get hermetic doors. Warehouses get access control. Canteens get wide doors.
Accessible entrances in Chloorkop
An automatic door is the simplest way to make an entrance usable for a wheelchair user, a parent with a pram or someone carrying stock. Opening width, opening speed, hold-open time and the sensor field are set on site for the people who actually use the door, and push buttons can be added where a door should only open on request. See automatic doors for disabled access.
Common faults on automatic doors Chloorkop
Fumes and dust on seals and sensors, and heavy use. See automatic door repairs.
Most faults are cleared on the first visit because our technicians carry common spares. Where a door is beyond economic repair, we quote a new operator on the existing leaves first, before a full replacement. See automatic door lifespan.
Working on site in Chloorkop
Chemical sites need safety inductions, permits and PPE. Every job starts with a safe-work method, and the doorway is barricaded while it is open.
Servicing automatic doors Chloorkop
Plant entrances are serviced against cycles; offices on our six-month standard.
Every visit ends with a written record, and several doors or buildings can sit under one service level agreement. Safety settings are re-checked on every visit; see automatic door safety requirements and the South African Bureau of Standards.
How we support automatic doors Chloorkop
Chloorkop is in Gauteng, within reach of our Laser Park base in Roodepoort. Same-day attendance in Gauteng is normally possible because both the workshop and the spares are in Laser Park. Response for each site is agreed up front against what a failure costs you.
- Our own technicians install, commission and service the doors. We do not sub-contract the work.
- Our technicians are trained on our own operators and on other manufacturers’ operators. See automatic door technician.
- Spares for the MC-125 and MCW-100 are held at Laser Park; see automatic door spare parts.
What to send us for an automatic doors Chloorkop quote
A photograph and a few measurements settle most of the specification before anyone visits. Send us:
- A photograph of the doorway taken from far enough back to show the wall on both sides.
- A photograph of the header and ceiling above the door.
- The clear opening width and height.
- Who uses the door and how busy it gets at the worst time of day.
- Whether the site needs permits and inductions.
A quotation for automatic doors Chloorkop usually follows within two working days of a site visit or a complete set of photographs. Request a quote or call 010 412 0062, Monday to Thursday 08:00 to 16:30 and Friday 08:00 to 14:00.
Automatic doors Chloorkop by building type
The buildings in Chloorkop set the specification more than anything else. These are the starting points we use for each type, before every doorway is confirmed on site.
Industrial and staff entrances in Chloorkop
On industrial sites we automate pedestrian routes only: staff entrances, offices, canteens and change rooms. Doors are kept away from forklift lanes, fitted with seals and brushes against dust, and serviced more often than an office door. Vehicle doors and roller shutters stay with the appropriate trade.
Office receptions in Chloorkop
An office reception sees staff, visitors and couriers all day and needs to stay controlled. Automatic doors Chloorkop offices use are normally sliding doors linked to the building’s card, tag or biometric readers, with a free-entry mode in office hours and controlled entry after hours. The door releases on the fire signal, and it can be set to stay locked during a panic event while still allowing escape from inside.
Healthcare entrances in Chloorkop
Healthcare buildings need hands-free entry for patients in wheelchairs, on crutches and on stretchers, and doors that never trap anyone. For automatic doors Chloorkop clinics and hospitals use, we set slow closing speeds, long hold-open times and a wide sensor field, fit battery backup so the entrance keeps working through load shedding, and use hermetically sealed doors where theatres or isolation rooms need an air seal.
Retail entrances in Chloorkop
Shop and centre entrances are judged on two things: they must never stop trading, and they must lock tight at closing. For automatic doors Chloorkop retailers use, we fit bi-parting sliding doors with a wide clear opening for trolleys and prams, a night lock that throws automatically when the centre closes, and sensors set so that people walking past the shopfront do not keep opening the door and letting the air-conditioning out. Busy entrances get a service interval based on cycles, not months.
How we deal with conditions in Chloorkop
The four things that wear an entrance in Chloorkop are shown in the first diagram. This is what we do about each of them on automatic doors Chloorkop.
| Condition in Chloorkop | What we do |
|---|---|
| Fumes and dust | Dust wears tracks, rollers and sensors. We fit brushes and seals, clean the track and lens on every visit and shorten the service interval on dusty sites. |
| Shift changes | A busy entrance can cycle several thousand times a day. We size the operator for the real count, set opening speed for the peak, and service against cycles so wear is caught before it causes a breakdown. |
| Storms | Storms bring wind, driving rain and, inland, hail; coastal sites add salt. We set sensors to ignore blowing leaves, use laminated or toughened safety glass, add surge protection where lightning is common and consider a revolving door where wind drives through a lobby. |
Sliding, swing or revolving: choosing automatic doors Chloorkop
Most entrances in Chloorkop are one of three types. The right one depends on the opening, the traffic and the people who use the door.
| Door type | Best for | Operator |
|---|---|---|
| Sliding (single or bi-parting) | Busy main entrances, malls, hospitals, offices | MC-125 |
| Telescopic sliding | Wide openings where the wall space is short | MC-125 telescopic |
| Swing | Corridors, toilets, existing doors, low traffic | MCW-100 |
| Revolving | Tall or windy lobbies, energy saving | Revolving system |
| Hermetic sliding | Theatres, laboratories, clean rooms | Hermetic system |
Sliding doors move the most people and suit most automatic doors Chloorkop main entrances. Swing doors suit narrow openings and existing doors. Revolving doors keep wind and heat loss out of a lobby but always need a swing door beside them for wheelchairs and goods. See automatic sliding doors, automatic swing doors and automatic revolving doors.
How an automatic doors Chloorkop project runs
- Photographs and measurements. You send the opening, a photograph and how busy the door is; we confirm the door type.
- Site visit. A technician checks the header, the floor, the power supply and the access-control connection.
- Written quotation. The configuration, the price and the lead time are confirmed in writing before anything is ordered.
- Installation. Our own team installs the operator and leaves, usually in a day for a standard entrance, keeping one door working where possible.
- Commissioning. Speeds, hold-open times, sensors and locking are set for the users, and the safety sensors are tested.
- Handover and service plan. You get a record of the settings and a service interval based on how busy the door is.
Most automatic doors Chloorkop installations in Gauteng are completed within two to three weeks of the order, depending on glass and leaves. Repairs and replacement operators are usually faster because the spares are in Laser Park.
Maintaining automatic doors Chloorkop
An automatic door is a machine that opens and closes thousands of times a week. Regular servicing keeps it safe and avoids most breakdowns. On every service of automatic doors Chloorkop we:
- Clean and check the track, rollers and guides.
- Check the belt, motor, gearbox and controller.
- Test the activation and safety sensors, and re-aim them if needed.
- Check the locking, the battery backup and the power-failure behaviour.
- Record the cycle count and the settings, and report anything that needs attention.
See the automatic door maintenance checklist and automatic door servicing.
Safety settings on automatic doors Chloorkop
Safety sensors stop or reverse a door before it touches anyone, and the opening and closing forces are limited. We set and test these on commissioning and on every visit, and we can add signage and markings so that people can see the glass. See automatic door signage.
Why choose MC Automations for automatic doors Chloorkop
- Our own operators. The MC-125 and MCW-100 are imported and assembled at our Laser Park base and tested to one million cycles.
- Our own team. We install, commission, service and repair with our own technicians, never sub-contractors.
- Any brand. We repair and service other manufacturers’ doors too, and can modernise an old entrance by fitting a new operator.
- Close to Chloorkop. Our workshop and spares are in Roodepoort, so Gauteng sites are attended quickly.
- Clear pricing. Operators have published starting prices, and every site gets a written quotation.
- Warranty. 24 months on the operator.
Areas we cover around Chloorkop
From Laser Park we attend sites across Chloorkop and the neighbouring areas of Kempton Park, Tembisa, Esther Park, R21 and Plants. The same technicians, operators and spares serve every one of them, so a site in Kempton Park gets the same response and the same service record as one in the next suburb.
Access control and automatic doors Chloorkop
Most commercial entrances in Chloorkop are part of a security system. We connect the door to card, tag, biometric, keypad or intercom readers, to a timer for trading hours and to the alarm, so the door runs in free mode when the building is open and controlled mode when it is not. The door releases on the fire signal and can be set to lock during a panic event while still letting people out. See automatic door access control and automatic door security.
Power failures and fire release
Every automatic doors Chloorkop entrance is commissioned with a defined behaviour for a power failure and for a fire alarm: open and stay open, close and lock, or keep running on battery backup. The choice is agreed with the building owner and its fire strategy and recorded at handover, then tested on every service. See automatic door power.
Automatic doors Chloorkop: frequently asked
Do you install automatic doors at laboratories in Chloorkop?
Yes. Hermetic or sealed sliding doors for quality labs, subject to site rules.
Which areas do you cover around Chloorkop?
Chloorkop, Kempton Park north, Tembisa side, Esther Park and the R21 edge.
How fast can you attend a breakdown in Chloorkop?
Same-day attendance in Gauteng is normally possible because our workshop and spares are in Laser Park. Response is agreed per site.
Do you automate garage doors or gates in Chloorkop?
No. We do pedestrian entrances only. Garage doors, driveway gates and roller shutters are a separate trade.
How much do automatic doors Chloorkop cost?
The MC-125 sliding door operator starts from R27 590 excluding VAT and the MCW-100 swing door operator from R15 900 excluding VAT. The finished price depends on the leaves, glass, sensors and access control, and is quoted per site.
What warranty do automatic doors Chloorkop carry?
24 months on the operator, installed and serviced by our own team.
How often should automatic doors Chloorkop be serviced?
Every six months for an average door, and more often for busy, dusty or hospital entrances, based on the cycle count.
Other areas near Chloorkop
Automatic doors Kempton Park · Automatic doors Tembisa · Automatic doors Spartan · All service areas · Automatic doors near me
Need automatic doors in Chloorkop?
Send the opening, the traffic and a photograph, and we will confirm the configuration in writing before anything is ordered.
In short
Automatic doors Chloorkop at a glance
- Automatic doors Chloorkop at plants are sealed.
- Automatic doors Chloorkop at labs are hermetic.
- Automatic doors Chloorkop at warehouses are access-controlled.
- Automatic doors Chloorkop are close to our Laser Park base.
- Automatic doors Chloorkop carry 24 months on the operator and are serviced by our own team.