Gauteng · Isando, Spartan and Jet Park
Automatic doors Isando: supply, installation and repairs
Automatic sliding and swing pedestrian entrances for Isando, Spartan, Jet Park and Elandsfontein: factories, warehouses, logistics offices, staff canteens and clean production areas near the airport.
Isando, Spartan and Jet Park form one of Gauteng’s largest industrial areas, next to the airport, with factories, warehouses, freight and logistics companies, and the offices, canteens and change rooms that go with them. Pedestrian doors here take dust, forklifts nearby and shift changes, so automatic doors Isando sites use must be robust and placed away from vehicle routes.
This page explains what drives the specification for automatic doors Isando needs, how we support it from Laser Park, and what to send us for a quotation. Places named here describe the area. They are not a client list.
Factory and warehouse staff entrances
Staff entrances and doors between offices and the factory floor see shift changes of hundreds of workers, dust and pallets passing close by.
In Isando, MC Automations supplies, installs and services automatic doors for commercial buildings, from commercial automatic doors and automatic glass doors to the automatic door operators that drive them. See how an automatic sliding door mechanism works, or plan your automatic door installation with us.
Robust sliding or swing doors on pedestrian routes, kept clear of forklift lanes. Vehicle doors and roller shutters stay with the appropriate trade. See automatic warehouse doors.
Automatic doors Isando: what we supply, install and repair
People search for this work in different words: automatic doors Isando, automatic sliding doors Isando, automatic glass doors, automatic door installers, automatic door repairs Isando or door automation. It is the same team and the same operators either way, with 24 months on the operator.
We supply and install sliding, telescopic, swing, revolving and hermetic doors, carry out repairs on any brand and service entrances on a planned cycle. Pedestrian entrances only: no garage doors, gates, roller shutters, door closers or private homes.
Logistics and freight offices
Freight forwarders and logistics companies near the airport run receptions and trade counters with drivers and couriers coming and going all day.
Sliding doors with access control at reception. See automatic door access control.
Canteens and change rooms
Canteens and change rooms are used by many people at the same time, with wet hands and full trays.
Hands-free sliding doors built for a high cycle count. See automatic door speed.
Clean production areas
Food, pharmaceutical and electronics producers need doors that close fully and keep dust and air pressure under control.
Hermetic or fast-closing sliding doors. See hermetic doors.
Head offices on industrial sites
Many Isando companies run their head office on the same site as the factory, with a smart reception for customers and suppliers.
Sliding doors with access control at reception. See office park automatic doors.
Airport-linked businesses
Hotels, car-hire offices and freight companies serve the airport around the clock.
Robust sliding doors with battery backup. See airport automatic doors.
The systems we install in Isando
Most automatic doors Isando buildings need come down to two operators, both imported and assembled at Laser Park and tested to one million operating cycles: the MC-125 sliding door operator, supplied from R27 590 excluding VAT, and the MCW-100 swing door operator, supplied from R15 900 excluding VAT, as published on our sister company Coetz.
The finished price depends on the leaves, glass, header, sensors, locking and access control, all quoted per site. See our automatic door prices guide and sliding vs swing door guide.
Every entrance also gets a defined power-failure behaviour, agreed with the building and its fire strategy; see automatic doors and load shedding.
Choosing the right entrance in Isando
Staff entrances get robust sliding or swing doors on pedestrian routes. Logistics receptions get access control. Canteens get hands-free sliding doors. Clean areas get hermetic doors.
Accessible entrances in Isando
An automatic door is the simplest way to make an entrance usable for a wheelchair user, a parent with a pram or someone carrying stock. Opening width, opening speed, hold-open time and the sensor field are set on site for the people who actually use the door, and push buttons can be added where a door should only open on request. See automatic doors for disabled access.
Common faults on automatic doors Isando
Dust in the tracks and sensors, and leaves damaged by pallets passing too close. See automatic door track.
Most faults are cleared on the first visit because our technicians carry common spares. Where a door is beyond economic repair, we quote a new operator on the existing leaves first, before a full replacement. See automatic door lifespan.
Working on site in Isando
Industrial sites need safety inductions, PPE and work planned around shifts. Every job starts with a safe-work method, and the doorway is barricaded while it is open.
Servicing automatic doors Isando
Staff entrances and canteens are serviced against cycles; dusty sites more often than offices.
Every visit ends with a written record, and several doors or buildings can sit under one service level agreement. Safety settings are re-checked on every visit; see automatic door safety requirements and the South African Bureau of Standards.
How we support automatic doors Isando
Isando is in Gauteng, within reach of our Laser Park base in Roodepoort. Same-day attendance in Gauteng is normally possible because both the workshop and the spares are in Laser Park. Response for each site is agreed up front against what a failure costs you.
- Our own technicians install, commission and service the doors. We do not sub-contract the work.
- Our technicians are trained on our own operators and on other manufacturers’ operators. See automatic door technician.
- Spares for the MC-125 and MCW-100 are held at Laser Park; see automatic door spare parts.
What to send us for an automatic doors Isando quote
A photograph and a few measurements settle most of the specification before anyone visits. Send us:
- A photograph of the doorway taken from far enough back to show the wall on both sides.
- A photograph of the header and ceiling above the door.
- The clear opening width and height.
- Who uses the door and how busy it gets at the worst time of day.
- How close the doorway is to forklift or vehicle routes.
A quotation for automatic doors Isando usually follows within two working days of a site visit or a complete set of photographs. Request a quote or call 010 412 0062, Monday to Thursday 08:00 to 16:30 and Friday 08:00 to 14:00.
Automatic doors Isando by building type
The buildings in Isando set the specification more than anything else. These are the starting points we use for each type, before every doorway is confirmed on site.
Industrial and staff entrances in Isando
On industrial sites we automate pedestrian routes only: staff entrances, offices, canteens and change rooms. Doors are kept away from forklift lanes, fitted with seals and brushes against dust, and serviced more often than an office door. Vehicle doors and roller shutters stay with the appropriate trade.
Office receptions in Isando
An office reception sees staff, visitors and couriers all day and needs to stay controlled. Automatic doors Isando offices use are normally sliding doors linked to the building’s card, tag or biometric readers, with a free-entry mode in office hours and controlled entry after hours. The door releases on the fire signal, and it can be set to stay locked during a panic event while still allowing escape from inside.
Healthcare entrances in Isando
Healthcare buildings need hands-free entry for patients in wheelchairs, on crutches and on stretchers, and doors that never trap anyone. For automatic doors Isando clinics and hospitals use, we set slow closing speeds, long hold-open times and a wide sensor field, fit battery backup so the entrance keeps working through load shedding, and use hermetically sealed doors where theatres or isolation rooms need an air seal.
How we deal with conditions in Isando
The four things that wear an entrance in Isando are shown in the first diagram. This is what we do about each of them on automatic doors Isando.
| Condition in Isando | What we do |
|---|---|
| Dust | Dust wears tracks, rollers and sensors. We fit brushes and seals, clean the track and lens on every visit and shorten the service interval on dusty sites. |
| Shift changes | A busy entrance can cycle several thousand times a day. We size the operator for the real count, set opening speed for the peak, and service against cycles so wear is caught before it causes a breakdown. |
| Forklifts nearby | Trolleys and pallets bend leaves and knock sensors out of line. We fit guards and bollards where needed and keep doors off vehicle routes. |
| Clean areas | Hands-free sensors remove a touch point, and hermetically sealed doors hold air pressure where theatres, laboratories or clean rooms require it. |
Sliding, swing or revolving: choosing automatic doors Isando
Most entrances in Isando are one of three types. The right one depends on the opening, the traffic and the people who use the door.
| Door type | Best for | Operator |
|---|---|---|
| Sliding (single or bi-parting) | Busy main entrances, malls, hospitals, offices | MC-125 |
| Telescopic sliding | Wide openings where the wall space is short | MC-125 telescopic |
| Swing | Corridors, toilets, existing doors, low traffic | MCW-100 |
| Revolving | Tall or windy lobbies, energy saving | Revolving system |
| Hermetic sliding | Theatres, laboratories, clean rooms | Hermetic system |
Sliding doors move the most people and suit most automatic doors Isando main entrances. Swing doors suit narrow openings and existing doors. Revolving doors keep wind and heat loss out of a lobby but always need a swing door beside them for wheelchairs and goods. See automatic sliding doors, automatic swing doors and automatic revolving doors.
How an automatic doors Isando project runs
- Photographs and measurements. You send the opening, a photograph and how busy the door is; we confirm the door type.
- Site visit. A technician checks the header, the floor, the power supply and the access-control connection.
- Written quotation. The configuration, the price and the lead time are confirmed in writing before anything is ordered.
- Installation. Our own team installs the operator and leaves, usually in a day for a standard entrance, keeping one door working where possible.
- Commissioning. Speeds, hold-open times, sensors and locking are set for the users, and the safety sensors are tested.
- Handover and service plan. You get a record of the settings and a service interval based on how busy the door is.
Most automatic doors Isando installations in Gauteng are completed within two to three weeks of the order, depending on glass and leaves. Repairs and replacement operators are usually faster because the spares are in Laser Park.
Maintaining automatic doors Isando
An automatic door is a machine that opens and closes thousands of times a week. Regular servicing keeps it safe and avoids most breakdowns. On every service of automatic doors Isando we:
- Clean and check the track, rollers and guides.
- Check the belt, motor, gearbox and controller.
- Test the activation and safety sensors, and re-aim them if needed.
- Check the locking, the battery backup and the power-failure behaviour.
- Record the cycle count and the settings, and report anything that needs attention.
See the automatic door maintenance checklist and automatic door servicing.
Safety settings on automatic doors Isando
Safety sensors stop or reverse a door before it touches anyone, and the opening and closing forces are limited. We set and test these on commissioning and on every visit, and we can add signage and markings so that people can see the glass. See automatic door signage.
Why choose MC Automations for automatic doors Isando
- Our own operators. The MC-125 and MCW-100 are imported and assembled at our Laser Park base and tested to one million cycles.
- Our own team. We install, commission, service and repair with our own technicians, never sub-contractors.
- Any brand. We repair and service other manufacturers’ doors too, and can modernise an old entrance by fitting a new operator.
- Close to Isando. Our workshop and spares are in Roodepoort, so Gauteng sites are attended quickly.
- Clear pricing. Operators have published starting prices, and every site gets a written quotation.
- Warranty. 24 months on the operator.
Areas we cover around Isando
From Laser Park we attend sites across Isando and the neighbouring areas of Spartan, Jet Park, Elandsfontein, Kempton Park and OR Tambo airport. The same technicians, operators and spares serve every one of them, so a site in Spartan gets the same response and the same service record as one in the next suburb.
Access control and automatic doors Isando
Most commercial entrances in Isando are part of a security system. We connect the door to card, tag, biometric, keypad or intercom readers, to a timer for trading hours and to the alarm, so the door runs in free mode when the building is open and controlled mode when it is not. The door releases on the fire signal and can be set to lock during a panic event while still letting people out. See automatic door access control and automatic door security.
Power failures and fire release
Every automatic doors Isando entrance is commissioned with a defined behaviour for a power failure and for a fire alarm: open and stay open, close and lock, or keep running on battery backup. The choice is agreed with the building owner and its fire strategy and recorded at handover, then tested on every service. See automatic door power.
Automatic doors Isando: frequently asked
Do you install automatic doors for factory staff entrances in Isando?
Yes, on pedestrian routes. We keep the door away from forklift lanes and leave vehicle doors to the appropriate trade.
Do you install roller shutters or vehicle doors in Isando?
No. We do pedestrian entrances only: sliding, swing, telescopic, revolving and hermetic doors.
Which areas do you cover around Isando?
Isando, Spartan, Jet Park, Elandsfontein, Kempton Park, Pomona and Bonaero Park.
Can you service all the pedestrian doors on an industrial site under one agreement?
Yes. A service level agreement can cover every pedestrian door on a site, serviced against each door’s cycle count.
How much do automatic doors Isando cost?
The MC-125 sliding door operator starts from R27 590 excluding VAT and the MCW-100 swing door operator from R15 900 excluding VAT. The finished price depends on the leaves, glass, sensors and access control, and is quoted per site.
What warranty do automatic doors Isando carry?
24 months on the operator, installed and serviced by our own team.
How often should automatic doors Isando be serviced?
Every six months for an average door, and more often for busy, dusty or hospital entrances, based on the cycle count.
Other areas near Isando
Automatic doors Kempton Park · Automatic doors Boksburg · Automatic doors Germiston · All service areas · Automatic doors near me · Automatic doors Jet Park · Automatic doors Spartan
Need automatic doors in Isando?
Send the opening, the traffic and a photograph, and we will confirm the configuration in writing before anything is ordered.
In short
Automatic doors Isando at a glance
- Automatic doors Isando on staff entrances are robust and kept off vehicle routes.
- Automatic doors Isando in logistics offices use access control.
- Automatic doors Isando in canteens are hands-free.
- Automatic doors Isando in clean areas can be hermetic.
- Automatic doors Isando carry 24 months on the operator and are serviced by our own team.