Gauteng · Ekangala and Ekandustria
Automatic doors Ekangala: supply, installation and repairs
Automatic sliding and swing entrances for Ekangala and the Ekandustria industrial area: factory offices and staff entrances, clinics, shopping centres, schools and government offices.
Ekangala is a township in the far east of Tshwane, north-east of Bronkhorstspruit, next to the Ekandustria industrial area, with factories and their offices and staff entrances, clinics, shopping centres, schools and government offices. Shift changes at the factories, month-end queues, dust and a long drive from Johannesburg shape the entrances here, so we specify robust operators and plan service visits in advance.
This page explains what drives the specification for automatic doors Ekangala needs, how we support it from Laser Park, and what to send us for a quotation. Places named here describe the area. They are not a client list.
Factory offices and staff entrances
Factories in Ekandustria have receptions, canteens and staff entrances that run on shifts.
Robust sliding doors with access control. See automatic warehouse doors and automatic door access control.

Automatic doors Ekangala: what we supply, install and repair
People search for this work in different words: automatic doors Ekangala, automatic sliding doors Ekangala, automatic glass doors, automatic door installers, automatic door repairs Ekangala or door automation. It is the same team and the same operators either way, with 24 months on the operator.
We supply and install sliding, telescopic, swing, revolving and hermetic doors, carry out repairs on any brand and service entrances on a planned cycle. Pedestrian entrances only: no garage doors, gates, roller shutters, door closers or private homes.
Clinics
Community clinics see long queues from early morning.
Hands-free sliding or low-energy swing doors with battery backup. See hospital automatic doors and automatic doors for disabled access.

Shopping centres
Shopping centres see month-end and pay-day peaks.
Bi-parting sliding doors, secure after hours. See shopping centre automatic doors.
Schools
Schools need controlled receptions and safe exits.
Push-button swing doors and sliding doors at reception. See automatic doors for schools.
Government offices
Service offices and pay points serve large queues.
Accessible sliding doors with access control after hours. See automatic door access control.
Canteens
Canteens see staff in waves at shift changes.
Wide sliding doors. See shopping centre automatic doors.
The systems we install in Ekangala
Most automatic doors Ekangala buildings need come down to two operators, both imported and assembled at Laser Park and tested to one million operating cycles: the MC-125 sliding door operator, supplied from R27 590 excluding VAT, and the MCW-100 swing door operator, supplied from R15 900 excluding VAT, as published on our sister company Coetz.
The finished price depends on the leaves, glass, header, sensors, locking and access control, all quoted per site. See our automatic door prices guide and sliding vs swing door guide.
Every entrance also gets a defined power-failure behaviour, agreed with the building and its fire strategy; see automatic doors and load shedding.
Choosing the right entrance in Ekangala
Factories get robust, access-controlled doors. Clinics get hands-free doors with battery backup. Shopping centres get bi-parting sliding doors. Schools get push-button doors.
Accessible entrances in Ekangala
An automatic door is the simplest way to make an entrance usable for a wheelchair user, a parent with a pram or someone carrying stock. Opening width, opening speed, hold-open time and the sensor field are set on site for the people who actually use the door, and push buttons can be added where a door should only open on request. See automatic doors for disabled access.
Common faults on automatic doors Ekangala
Dust and forklift traffic near industrial entrances, and heavy month-end wear. See automatic warehouse doors.
Most faults are cleared on the first visit because our technicians carry common spares. Where a door is beyond economic repair, we quote a new operator on the existing leaves first, before a full replacement. See automatic door lifespan.
Working on site in Ekangala
Factories need safety inductions; clinics keep one entrance open while we work. Every job starts with a safe-work method, and the doorway is barricaded while it is open.
Servicing automatic doors Ekangala
Factory and clinic entrances are serviced against cycles; offices on our six-month standard.
Every visit ends with a written record, and several doors or buildings can sit under one service level agreement. Safety settings are re-checked on every visit; see automatic door safety requirements and the South African Bureau of Standards.
How we support automatic doors Ekangala
Ekangala is in Gauteng, within reach of our Laser Park base in Roodepoort. Same-day attendance in Gauteng is normally possible because both the workshop and the spares are in Laser Park. Response for each site is agreed up front against what a failure costs you.
- Our own technicians install, commission and service the doors. We do not sub-contract the work.
- Our technicians are trained on our own operators and on other manufacturers’ operators. See automatic door technician.
- Spares for the MC-125 and MCW-100 are held at Laser Park; see automatic door spare parts.

What to send us for an automatic doors Ekangala quote
A photograph and a few measurements settle most of the specification before anyone visits. Send us:
- A photograph of the doorway taken from far enough back to show the wall on both sides.
- A photograph of the header and ceiling above the door.
- The clear opening width and height.
- Who uses the door and how busy it gets at the worst time of day.
- Whether staff entrances run on shifts, and how many people change shift at once.

A quotation for automatic doors Ekangala usually follows within two working days of a site visit or a complete set of photographs. Request a quote or call 010 412 0062, Monday to Thursday 08:00 to 16:30 and Friday 08:00 to 14:00.
Automatic doors Ekangala by building type
The buildings in Ekangala set the specification more than anything else. These are the starting points we use for each type, before every doorway is confirmed on site.
Industrial and staff entrances in Ekangala
On industrial sites we automate pedestrian routes only: staff entrances, offices, canteens and change rooms. Doors are kept away from forklift lanes, fitted with seals and brushes against dust, and serviced more often than an office door. Vehicle doors and roller shutters stay with the appropriate trade.
Healthcare entrances in Ekangala
Healthcare buildings need hands-free entry for patients in wheelchairs, on crutches and on stretchers, and doors that never trap anyone. For automatic doors Ekangala clinics and hospitals use, we set slow closing speeds, long hold-open times and a wide sensor field, fit battery backup so the entrance keeps working through load shedding, and use hermetically sealed doors where theatres or isolation rooms need an air seal.
Retail entrances in Ekangala
Shop and centre entrances are judged on two things: they must never stop trading, and they must lock tight at closing. For automatic doors Ekangala retailers use, we fit bi-parting sliding doors with a wide clear opening for trolleys and prams, a night lock that throws automatically when the centre closes, and sensors set so that people walking past the shopfront do not keep opening the door and letting the air-conditioning out. Busy entrances get a service interval based on cycles, not months.
Schools, churches and halls in Ekangala
Schools, churches and halls move large numbers of people in a few minutes and then need the entrance controlled. Automatic doors Ekangala schools and halls use are usually swing doors with push buttons on halls and classrooms, so staff decide when a door opens, and sliding doors at reception linked to the visitor system.
Office receptions in Ekangala
An office reception sees staff, visitors and couriers all day and needs to stay controlled. Automatic doors Ekangala offices use are normally sliding doors linked to the building’s card, tag or biometric readers, with a free-entry mode in office hours and controlled entry after hours. The door releases on the fire signal, and it can be set to stay locked during a panic event while still allowing escape from inside.
How we deal with conditions in Ekangala
The four things that wear an entrance in Ekangala are shown in the first diagram. This is what we do about each of them on automatic doors Ekangala.
| Condition in Ekangala | What we do |
|---|---|
| Shift changes | A busy entrance can cycle several thousand times a day. We size the operator for the real count, set opening speed for the peak, and service against cycles so wear is caught before it causes a breakdown. |
| Industrial dust | Dust wears tracks, rollers and sensors. We fit brushes and seals, clean the track and lens on every visit and shorten the service interval on dusty sites. |
| Power cuts | Battery backup keeps a door working through load shedding, and every entrance gets a defined power-failure behaviour, open or closed, agreed with the building and its fire strategy. |
Sliding, swing or revolving: choosing automatic doors Ekangala
Most entrances in Ekangala are one of three types. The right one depends on the opening, the traffic and the people who use the door.
| Door type | Best for | Operator |
|---|---|---|
| Sliding (single or bi-parting) | Busy main entrances, malls, hospitals, offices | MC-125 |
| Telescopic sliding | Wide openings where the wall space is short | MC-125 telescopic |
| Swing | Corridors, toilets, existing doors, low traffic | MCW-100 |
| Revolving | Tall or windy lobbies, energy saving | Revolving system |
| Hermetic sliding | Theatres, laboratories, clean rooms | Hermetic system |
Sliding doors move the most people and suit most automatic doors Ekangala main entrances. Swing doors suit narrow openings and existing doors. Revolving doors keep wind and heat loss out of a lobby but always need a swing door beside them for wheelchairs and goods. See automatic sliding doors, automatic swing doors and automatic revolving doors.
How an automatic doors Ekangala project runs
- Photographs and measurements. You send the opening, a photograph and how busy the door is; we confirm the door type.
- Site visit. A technician checks the header, the floor, the power supply and the access-control connection.
- Written quotation. The configuration, the price and the lead time are confirmed in writing before anything is ordered.
- Installation. Our own team installs the operator and leaves, usually in a day for a standard entrance, keeping one door working where possible.
- Commissioning. Speeds, hold-open times, sensors and locking are set for the users, and the safety sensors are tested.
- Handover and service plan. You get a record of the settings and a service interval based on how busy the door is.
Most automatic doors Ekangala installations in Gauteng are completed within two to three weeks of the order, depending on glass and leaves. Repairs and replacement operators are usually faster because the spares are in Laser Park.
Maintaining automatic doors Ekangala
An automatic door is a machine that opens and closes thousands of times a week. Regular servicing keeps it safe and avoids most breakdowns. On every service of automatic doors Ekangala we:
- Clean and check the track, rollers and guides.
- Check the belt, motor, gearbox and controller.
- Test the activation and safety sensors, and re-aim them if needed.
- Check the locking, the battery backup and the power-failure behaviour.
- Record the cycle count and the settings, and report anything that needs attention.
See the automatic door maintenance checklist and automatic door servicing.
Safety settings on automatic doors Ekangala
Safety sensors stop or reverse a door before it touches anyone, and the opening and closing forces are limited. We set and test these on commissioning and on every visit, and we can add signage and markings so that people can see the glass. See automatic door signage.
Why choose MC Automations for automatic doors Ekangala
- Our own operators. The MC-125 and MCW-100 are imported and assembled at our Laser Park base and tested to one million cycles.
- Our own team. We install, commission, service and repair with our own technicians, never sub-contractors.
- Any brand. We repair and service other manufacturers’ doors too, and can modernise an old entrance by fitting a new operator.
- Close to Ekangala. Our workshop and spares are in Roodepoort, so Gauteng sites are attended quickly.
- Clear pricing. Operators have published starting prices, and every site gets a written quotation.
- Warranty. 24 months on the operator.
Areas we cover around Ekangala
From Laser Park we attend sites across Ekangala and the neighbouring areas of Ekandustria, Bronkhorstspruit, Zithobeni, Rethabiseng and Kwaggafontein side. The same technicians, operators and spares serve every one of them, so a site in Ekandustria gets the same response and the same service record as one in the next suburb.
Access control and automatic doors Ekangala
Most commercial entrances in Ekangala are part of a security system. We connect the door to card, tag, biometric, keypad or intercom readers, to a timer for trading hours and to the alarm, so the door runs in free mode when the building is open and controlled mode when it is not. The door releases on the fire signal and can be set to lock during a panic event while still letting people out. See automatic door access control and automatic door security.
Power failures and fire release
Every automatic doors Ekangala entrance is commissioned with a defined behaviour for a power failure and for a fire alarm: open and stay open, close and lock, or keep running on battery backup. The choice is agreed with the building owner and its fire strategy and recorded at handover, then tested on every service. See automatic door power.
Automatic doors Ekangala: frequently asked
Do you install automatic doors at factories in Ekandustria?
Yes. Robust sliding doors with access control suit factory offices and staff entrances.
Which areas do you cover around Ekangala?
Ekangala, Ekandustria, Bronkhorstspruit, Zithobeni, Rethabiseng and the surrounding villages.
How fast can you attend a breakdown in Ekangala?
Same-day attendance in Gauteng is normally possible because our workshop and spares are in Laser Park. Response is agreed per site.
Do you automate garage doors or gates in Ekangala?
No. We do pedestrian entrances only. Garage doors, driveway gates and roller shutters are a separate trade.
How much do automatic doors Ekangala cost?
The MC-125 sliding door operator starts from R27 590 excluding VAT and the MCW-100 swing door operator from R15 900 excluding VAT. The finished price depends on the leaves, glass, sensors and access control, and is quoted per site.
What warranty do automatic doors Ekangala carry?
24 months on the operator, installed and serviced by our own team.
How often should automatic doors Ekangala be serviced?
Every six months for an average door, and more often for busy, dusty or hospital entrances, based on the cycle count.
Other areas near Ekangala
Automatic doors Bronkhorstspruit · Automatic doors Cullinan · Automatic doors Mamelodi · All service areas
Need automatic doors in Ekangala?
Send the opening, the traffic and a photograph, and we will confirm the configuration in writing before anything is ordered.
In short
Automatic doors Ekangala at a glance
- Automatic doors Ekangala at factories are access-controlled.
- Automatic doors Ekangala at clinics are hands-free with battery backup.
- Automatic doors Ekangala in shopping centres handle month-end queues.
- Automatic doors Ekangala are served on planned visits from our Laser Park base.
- Automatic doors Ekangala carry 24 months on the operator and are serviced by our own team.
